The Buyers Products Hook and Keeper for Enclosed Trailer Door part # BP64FR does not come with hardware as the hardware required will vary from trailer to trailer. That said, there isn't anything needed that you can't find at a local hardware store. You'll basically just be using wood screws that can grab onto the trailer walls without going through. view full answer...
The Plunger and Nylon Socket Door Holder part # DH605 does not come with installation hardware but we do have screws that will work for this, the part # 1131832. view full answer...
The screws for mounting the license plate that come with the Enclosed Cargo Trailer License Plate Holder # LP35BB are 1/4" screws with a coarse (20 threads per inch) thread style.
Attached is a review video for you to check out. view full answer...
The Pro Series Standard Brake Winch # PSKR10000301 includes a cable clamp on the side of the winch. This clamp allows for the cable to be looped over the drum and through the side of the winch and secured.
This winch is designed for use with aircraft grade cable only. It allows for 50 feet of cable to be stored on the drum, with a maximum cable diameter of 7/32 of an inch. If you need cable the Fulton Galvanized Winch Cable with Hook is available as part # FWC7500100, and is 50 feet long... view full answer...
If you're ordering an access door like the Ultra-Fab Universal Access Door for Trailers and RVs - 5" x 5" Opening - Chrome # UF48-979010 or the Ultra-Fab Universal Access Door for Trailers and RVs - 5" x 5" Opening - White # UF48-979009 then you'll have to order the Camco Cam Lock - Straight or Offset - Thumb Operated - 7/8" Thick
Item # CAM44323 separately to replace the keyed locks that come with the door. view full answer...
The Lippert Patio Upgrade Kit # LC27FR is a replacement rear ramp door that is capable of supporting itself in a patio orientation. Not all doors that come on toy haulers are capable of acting as a patio due to the structure inside the door. This door will replace an existing 94" wide by 94" tall existing ramp door. It has all the springs and hinges attached.
You will need the Lippert Garage Door Cable for Toy Hauler Patio Doors # LC39FR to hold the door in the patio position. view full answer...
The bulbs in the Yakima license plate kit for Rack and Roll trailers # 8880166 uses incandescent bulbs. The bulbs are replaceable and can be obtained at any auto parts store. view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11127 is a confirmed fit for 2012-2015 Mazda 5 models. It does come with pin and clip, but the ball mount is sold separately. For a ball mount, I recommend the Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs # C45520. You will also want a hitch ball like # C40001 for a 1-7/8 inch or # C40018 for a 2 inch.
For your vehicle trailer connection, I recommend the T-One Vehicle Wiring Harness with 4-Pole... view full answer...
The Malone MicroSport Trailer is offered with no kayak carriers as part # MPG460G and with kayak carriers as part # MPG462G2. If you go with the option without the carriers you can add the spare tire and holder with part # MPG465. view full answer...
The Locking Stainless Steel Flush Door Latch, Part # L1833 does not come with a gasket or a striker plate.
This is a flush mount latch and will fit in doors up to 7/8 inches thick. I have attached a photo of the latch with the dimensions. I have also attached a link to our product page for the door latches we offer. view full answer...
In regards to the Strap Hinge for Enclosed Cargo Trailer Doors part # 2212, hardware is not include nor do we offer this separately. Therefore, you'll simply need to take a trip down to your local hardware store and choose the nuts/bots that best work for your application. view full answer...
I recommend using the MORryde StepAbove RV Steps for 21-3/4" to 22-1/4" Wide Doorways - 2 Steps # MR86RR, which I was able to confirm with my contact at MORryde will work on your door with 22-1/2" between the flanges. The bracket should have enough play to close the 1/4" gap according to them, but he mentioned if you've still got a little slack you can use something as a shim/spacer to reduce movement. This is a 2 step option that is ideal for entry heights between 25"-29". view full answer...
The hinge block piece that comes with the Ramp Gate Seal Kit for Enclosed Trailer Ramp # SR95FR is designed to be trimmed and used for multiple hinge locations. Since each trailer design is different they just toss one large block in the kit so you can trim on as-needed basis. view full answer...
The Loadstar ST205/75D14 Bias Trailer Tire with 14" White Wheel # AM3S440 will deliver mounted to your door. You will want to check the air pressure and set it before mounting on your trailer as the tire pressure can change over time due to temperatures and elevation changes. This wheel and tire comes mounted from the manufacturer as we do not mount any tires on wheels in our facility. view full answer...
I can see how either way would "in theory" work well, but what we've gotten from our weight distribution manufacturers is that you let it auto level first and then set the system up so that the WD's spring bar tension is accurate for how the vehicle's suspension configuration and not be too severe.
Otherwise if you do the auto-level after the WD system you may end up with the WD and the air system working against each other. view full answer...
Having a slider enables your vehicle to make normal turns during low-speed maneuvers and in narrow spaces without fear of your trailer's contacting the cab of your vehicle. Other sliders require you to get out and manually operate the slider which be somewhat of a hassle.
You're correct that the B&W Patriot # BWRVK3270, is a great fifth wheel hitch. It uses a dual jaw and has a maximum capacity up to 18,000 pounds. to use the Patriot in your Ram you need an install bracket kit like# BWRVK2600... view full answer...
For your 2021 Heartland Trail Runner Travel Trailer I recommend the Furrion Vision S Wireless RV Observation Camera System Item # FCE48TASL-05. This kit comes with the the rear camera, two side cameras, and a 7" LCD color monitor. All cameras have LED lights for visibility at night. The rear camera has a built-in microphone and the system has built in motion detection. The system is a wireless system and does not require a wire connection from cameras to the monitor. Each camera simply... view full answer...